CLASSIC SOLID
Walnut Flooring
Plain Sawn Walnut - Printable product sheet
Specifications:
- ¾” thickness, solid wood product.
- Tongue & Groove sides, matched ends (t&g), bottoms are stress relieved.
Grain Patterns:
Plain-Sawn
NOFMA’s Guideline: “Any combination of grain classifications including Plain-Sawn, Rift-Sawn & Quarter-Sawn.” (Plain-Sawn is defined as boards in whose cross section the angle of the annual ring tangent to the face of the piece to be between 0 and 30 degrees Rift-Sawn is 30 to 60 degrees and Quarter-Sawn is from 45 to 90 degrees).
Quarter-Sawn
Available only by special request.
Rift & Quarter-Sawn
Available only by special request.
Grades:
Clear Grade: - available by special request only.
Select and Better Grade Rules:
NOFMA’s Guideline: “A flooring product with coloration variations produced by differences of natural heartwood and sapwood, along with the following characters described:
The face may contain: unlimited darkened sapwood, no bright sapwood allowed. Knots/Burls: Broken Knots up to 3/8” diameter, with no broken or loose pieces and must be fillable. Torn Grain: Must san out, (1/32” or less deep) a torn area of no more than 1” x 1” x 3’ permitted. Tongue: ½ tongue allowed. Checks: One check ½” long allowed every foot. Checks can be slightly open, 1/64” wide by 1/8” deep or less, and limited to 3 or less in a single group. Corner Breaks: A chipped area may extend ¼” x .05”. Edge Defects: One slight edge defect per 2’ allowed, less than the thickness of a dime and ½” long. The following defects are not allowed: Pith, Shake, Rot, rough face or split ends.
Character Grade:
A blend of 80% Number One Common and 20% Number Two Common NOFMA grades.
NOFMA’s Guideline for No. One Common: “A flooring product which contains
prominent variations in coloration and varying characters. Boards must be at least 25% heartwood. Sapwood may be stained, blotchy or speckled. No broken knots where the unsound portion extends through the piece. No open defects may extend through the piece. For a complete description, please visit www.nwfa.org for the latest grading rules.
NOFMA’s Guideline for No. Two Common: “A flooring product which may contain natural variations of the forest product and manufacturing imperfections. The purpose of this grade is to furnish a floor suitable for homes, general utility use, or where character marks and contrasting appearance is desired. For a complete description, please visit www.nwfa.org for the latest grading rules.
NOFMA’s Guideline for No. Two Common: “A flooring product which may contain sound natural variations of the forest product and manufacturing imperfections. The purpose of this grade is to furnish a floor suitable for homes, general utility use, or where character marks and contrasting appearance is desired. The following characters are not admitted:
Shattered or rotten ends, large broken knots, excessive bad millwork, shake, advanced rot, and similar unsound defects. Dark machine burns exceeding 3/64" deep not admitted. Knot holes and open characters which will readily fill are admitted. A limited number of pieces with no tongue which may be face nailed are admitted.”
Surface Treatments Available:
- Unfinished, square edged
- Unfinished, micro bevel on long edges
- Hand Scraped – not machine scraped, add $2.50/sq.ft.
- Wire Brushed, add $1.50/sq.ft.
Flooring Options Including:
- Single Planks
- Random Width Planks
- Herringbone, call for pricing
- Chevron, call for pricing
- Parquet designs by special request, call for pricing
The finest flooring available anywhere.
|
|
|
|
Get a wholesale pricing quote and a sample
Contact Kent MacPherson at
888-767-7707 or email:
Kent@Quarter-SawnFlooring.com
|
