White Oak Quarter-Sawn Flooring

Printable product sheet

Description:

• Spectacular Shimmering Ray Flecks covering at least 80% of the surface of every board
• Straight Grained
• All Heart Wood (95% of white sapwood removed)
• Long Lengths (5' average board length, 30” minimum, 8-12' maximum)
• Exceeds NOFMA clear Oak grade
• Plank Widths: 4”, 5” & 6” (special order widths available)

Specifications:

• Vertical grain structure of 80 - 90 degrees
• 3/4" thickness, (other thicknesses available)
• Unfinished
• T&G and end matched to NOFMA standard
• Engineered:
  • Wear Layer of 4mm
  • Platform of 15mm, 11ply Russian Baltic Birch
  • Wear layer permanently attached with Bostiks flexible urethane glue
• Target Moisture content of 9% (7% available by use of interior grade platform)
• Janka hardness 1360

Quarter-Sawn Flooring, Inc. P.O. Box 1372 Nashville, Indiana 47448-1372 Ph. 1-888-767-7707 Kent@Quarter-SawnFlooring.com

For answers to your questions, or for prices, please contact Kent at
888-767-7707 or email:
Kent@Quarter-SawnFlooring.com

There is a big difference between standard quarter-sawn flooring and the product we sell.

You can legally call a floorboard “quarter-sawn” if its grain is between 60-90 degrees. This is best flooring available from other hardwood flooring companies.

Our unique sawing process produces floorboards that are of a much higher quality with a much tighter grain – between 80-90 degrees. Having the grain running perpendicular to the surface of the flooring, while far more time intensive to produce, cuts across the wood's ray cells yielding "ray-flecked" grain with a spectacularly iridescent and shimmering "flake figure".

Cross section of engineered flooring showing our thick wear layer, our radial-sawn vertical grain, tongue & groove, stress relief milling and 11-ply Baltic Birch platform.